Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Filter in the Citroën Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuel filter

Today, we will explain how to replace the fuel filter in the Citroën Xsara Picasso. To perform the replacement, open the front bonnet and unscrew the fastening elements of the engine cover using a 10mm socket. Remove the engine cover and clean the filter box with a multi-purpose cleaning spray. Using a pry bar, disconnect the fuel pressure sensor connector and the fuel lines from the filter. Unscrew the filter mounting element using an oil filter chain wrench. Remove the fuel filter, take out the old filter cartridge from the housing cover using a pry bar. Clean the filter box and cover using a cleaning spray. Attach the new filter to the cover and remove the adhesive seal with a flat screwdriver to replace it. Install the new fuel filter and tighten the fastening elements. Reconnect the fuel lines to the filter and start the engine for a few seconds to ensure the component works. Complete the replacement by refitting the engine cover.

Posted on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Xsara Picasso (1999-2012 / MK 1) The diesel filter on the Citroen Xsara Picasso is located at the centre of the engine block, at the front of the vehicle. To access it, lift the bonn…
Citroen Xsara Picasso (1999-2012 / MK 1) Replace the fuel filter from the Citroen Xsara Picasso vehicle. Lift the car using a column lift; locate the fuel filter as shown in the video. Using…
Citroen Xsara Picasso (1999-2012 / MK 1) Need to remove the diesel filter on a Citroen Xsara Picasso? Here’s how to do it. Lift the front bonnet of the car and locate the diesel filter as sh…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos