Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Spare Wheel on the Citroen Berlingo/Peugeot Partner

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Wheel

In this tutorial video, you will see how to remove the spare wheel and replace it on the Citroen Berlingo first generation, as well as on the Peugeot Partner. First, open the rear hatch and start by unscrewing the bolt of the spare wheel retaining bracket; then turn the bracket to extract the spare wheel from under the vehicle, as illustrated in the video. At this point, lift the vehicle with the jack and remove the wheel; simply replace it with the spare, then reposition everything on the vehicle, following the video to the end!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Disassembly of the front door panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) The following steps will show us how to disassemble and replace the front door panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. F…
How to replace the wheel with the spare one of the Citroen Berlingo - Peugeot Partner Tepee
How to replace the wheel with the spare one of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (1996-2013 / MK 1) The following steps will help us in the process of disassembling and replacing the wheel with the spare wheel of the Citroen Berlingo, as well as the…
How to Remove or Configure the Rear Seats of the Citroen Berlingo - Peugeot Partner
How to Remove or Configure the Rear Seats of the Citroen Berlingo - Peugeot Partner
Citroen Berlingo (2008-2018 / MK 2) Let's briefly go through the steps to configure or remove the rear seats of the Citroen Berlingo, as well as the Peugeot Partner. First, open the sid…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos