Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Audi A3 8l?

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Service warning light

The reset of the service light on the Audi A3 model 8l from 2002 follows the following steps: -insert the key into the ignition and turn on the vehicle's instrument panel; -press and hold the right button on the instrument panel for a few seconds; -set the new mileage for the next service by rotating the right wheel; -turn off the instrument panel; Afterwards, turn on the instrument panel to confirm the reset of the service light. If the reset operation is not successful, you can repeat the same procedure a second time. If the problem persists, take the vehicle to the workshop.

Posted on 24 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on an Audi A3.
How to reset the service light on an Audi A3.
Audi A3 (2012-2019 / MK 3, 8V) To reset the service on the Audi A3, the first thing to do is to get into the car and close all four doors. Turn on the ignition. You will see the se…
How to reset the "Service" indicator on an Audi A3?
How to reset the "Service" indicator on an Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) To reset the "Service" light on an Audi A3, turn on the instrument panel without starting the engine. Access the onboard computer through the central…
How to reset the service indicator on an Audi A3
How to reset the service indicator on an Audi A3
Audi A3 (2012-2019 / MK 3, 8V) The tutorial in question shows how to reset the service light of an Audi A3 car. Get into the vehicle, insert the key into the slot and turn it to th…

Other guides you may be interested in

How to Replace the Headlamp Bulb on a Kia Sportage

To replace the headlamp bulbs on a Kia Sportage: open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlamp (at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holders back into the headlamp housing. Test the fitted bulbs on the vehicle.

Watch the video!


by ScegliAuto

More videos