Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Roof Bars on a Fiat 500L

Model: Fiat 500 500 X - Years 2014-2022
Part: Roof rack bars

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) Start by assembling the roof bars, adjusting them to the correct measurements for the roof of your Fiat 500L. Next, open the doors of your car and po…
Fiat 500 (2007-2022 / 312) Below are the main instructions that will allow you to install roof bars or roof racks on the Fiat 500; note that each type of roof bar model has a d…
Fiat 500 (2012-2023 / 500 L) Fitting roof bars on a Fiat 500L? This operation is not too complex; let's see how to do it. Install the roof bar kit. The bars must be adjusted acco…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos