Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Roof Bars on a Fiat 500L

Model: Fiat 500 500 L - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Roof rack bars

See other generations:
Video tutorial

Fitting roof bars on a Fiat 500L? This operation is not too complex; let's see how to do it. Install the roof bar kit. The bars must be adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails.

Once the width of the anchoring brackets is adjusted, tighten the pins with the butterfly bolt (if a lock is present) until they are fully secured to the roof rails of the car. Apply safety caps on both sides.

Test for complete stability of the bars mounted on the roof.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Install Roof Bars on a Fiat 500L
How to Install Roof Bars on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Start by assembling the roof bars, adjusting them to the correct measurements for the roof of your Fiat 500L. Next, open the doors of your car and po…
How to Install Roof Bars on a Fiat 500L
How to Install Roof Bars on a Fiat 500L
Fiat 500 (2014-2022 / 500 X) Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown …
How to Install Roof Bars on the Fiat 500
How to Install Roof Bars on the Fiat 500
Fiat 500 (2007-2022 / 312) Below are the main instructions that will allow you to install roof bars or roof racks on the Fiat 500; note that each type of roof bar model has a d…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos