Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Headlight bulb

First, release the bonnet using the lever inside your vehicle, then lift it. You can now locate the rear of the headlamp to carry out the necessary replacements. Remove the three screws indicated near the headlamp. You will also need to detach the part of the wing that is fixed to the inner part of the bumper. Once the indicated screws are removed, simply extract the headlamp, disconnect the plug at the back, and then remove the protective cover to carry out the necessary replacements.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front turn signal bulb of the Audi A3
How to replace the front turn signal bulb of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will explain how to replace the front turn signal bulb on an Audi A3 model 8p. To perform the bulb replacement, we need to open the front ho…
How to replace the front headlight bulb of the Audi A3
How to replace the front headlight bulb of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will explain how to replace the headlight bulb of the right front headlight of an Audi A3 model 8P car. Before proceeding with the replaceme…
Replacement of the front headlight bulb of the Audi A3.
Replacement of the front headlight bulb of the Audi A3.
Audi A3 (2003-2013 / MK 2, 8P) Today's guide will show us the procedure on how to dismantle and replace the headlight bulb of the Audi A3, following the instructions below. First, …

How to Remove the Bonnet on a Smart Fortwo

To open the front bumper of the Smart Fortwo for bulb maintenance, follow these steps: open the plastic levers located at the sides of the front grille with your hands. Once the front plastic is free, lift it upwards with your hands, then remove it from the bodywork as shown in the video. After removing the mentioned piece, replace the damaged bulbs. To reassemble, secure the plastic cover at the front of the car and then at the bottom. Finally, close the bonnet release levers with your hands.

Watch the video!


by ScegliAuto

More videos