Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signal bulb of the Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side marker bulb

See other generations:
Video tutorial

Today we will explain how to replace the front turn signal bulb on an Audi A3 model 8p. To perform the bulb replacement, we need to open the front hood and then remove the cover of the light fixture. After removing the cover, we pull the bulb out of its position to disconnect the connector and replace it with a new one. We connect the bulb to the connector, insert the bulb into the headlight, and close the light fixture cover.

Once the front hood is closed, we turn on the vehicle lights to verify the correct functioning of the bulb. It is not necessary to remove the headlight to know the bulb model as the code is indicated on the headlight itself.


Posted on 12 March 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on an Audi A3?
How to Replace the Front Headlight Bulb on an Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To replace the front headlight bulb on an Audi A3, loosen the screws located inside the wheel arch of the corresponding front wheel: once these screw…
How to Replace the Front Headlamp Bulb on an Audi A3
How to Replace the Front Headlamp Bulb on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To replace the front headlamp bulb on an Audi A3, lift the car and loosen the bolts securing the front wheel on the same side as the bulb to be repla…
How to replace the side turn signal bulb of the Audi A3
How to replace the side turn signal bulb of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Replacing the turn signal light bulb of the right and left side of the Audi A3 model 8V is an easy and quick operation to perform independently. To r…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos