Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb of an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Today's guide shows you how to remove and replace the front headlight bulb of an Audi A3, following the instructions below. First, open the bonnet of your car and begin by removing the plastic protective cover of the bulb; then disconnect the electrical connector of the bulb to remove it from the headlight unit, as shown in the video.

At this point, install the new front headlight bulb of the correct type and fitting, connect the electrical supply, and check its operation!


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on the Audi A3
Replacing the Front Headlamp Bulb on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Follow these brief instructions to remove and replace the dipped beam bulb in the front headlamp of the Audi A3. First, open the bonnet of the vehicl…
Replacement of the front headlight bulb of the Audi A3
Replacement of the front headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will discover the information that will allow us to disassemble and replace the headlight bulb of the Audi A3. In order to access the low be…
How to replace the front headlight bulb of the Audi A3
How to replace the front headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today's information will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Audi A3. First, we open th…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos