Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
8V, MK 3
- Years 2012-2019 Following these brief instructions, we will see how to disassemble and replace the low beam bulb of the front headlight of the Audi A3. First, open the hood of the car and start removing the plastic protective cap of the bulb; in case of replacing a xenon bulb, it may be necessary to disassemble the headlight assembly, as shown in the video. Disconnect the electrical connector of the bulb to remove it from the front headlight, replacing it with the new one (having the same attachment); then reassemble the headlight assembly!
Posted on 25 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the error of the VSC warning light and the ABS of the Toyota Rav4Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |