Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Today we will discover the information that will allow us to disassemble and replace the headlight bulb of the Audi A3. In order to access the low beam bulb of the headlight, it is necessary to remove the plastic cover located on the front fender; then disconnect the electrical connector of the xenon bulb and replace it with the new one, of the correct type and having the same attachment, as shown in the video.

At this point, we correctly install the low beam bulb and verify its operation, finally reassembling the headlight cap and the fender cover!


Posted on 27 May 2025 by ScegliAuto


Related tutorials

How to replace the front headlight bulbs on an Audi A3
How to replace the front headlight bulbs on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to replace the front headlight bulbs on an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard…
How to change the front headlight bulbs on an Audi A3
How to change the front headlight bulbs on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to change the front headlight bulbs on an Audi A3. Open the front bonnet by pulling the lever located at the bottom right of the dashboard …
How to Replace the Front Headlight Bulbs on an Audi A3
How to Replace the Front Headlight Bulbs on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How to replace the front headlight bulbs on an Audi A3? Open the front bonnet by pulling the lever located at the bottom right of the dashboard and s…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos