Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Clock on the Benelli Panarea 125?

Model: Benelli Panarea 125
Part: Clock

Video tutorial

To set the clock on the Benelli Panarea 125, turn on the instrument panel by inserting the ignition key into the ignition switch. Once the panel is on, press and hold the button at the bottom right of the display.

The hours will start to flash, which can be adjusted by repeatedly pressing the same button. Then, press the button at the top right to make the minutes flash, which can be modified using the same procedure.


Updated on 17 November 2026 by ScegliAuto


Related tutorials

Panarea 125 To install the windscreen on the Benelli Panarea 125, first loosen the mirrors located on the sides of the front shield using appropriate tools. Once…
Panarea 125 It will be possible to perform the engine oil replacement on the Benelli Panarea 125 by completely unscrewing the drain plug of the oil sump, which w…
Panarea 125 The engine oil that will be present inside the Benelli Panarea 125 can be replaced by loosening the drain plug of the oil sump located in the central…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Engine Oil of the Harley Davidson Road King?

To replace the engine oil of the Harley Davidson Road King, loosen the oil tank drain plug: this plug is located at the central lower part of the bike, and once removed, all the used oil can be drained into a suitably positioned container. After the oil has drained out, you can also remove the corresponding filter to insert the new replacement part, which is also located at the lower area of the bike. Finally, top up the oil through the breather on the right side.

Watch the video!


by ScegliAuto

More videos