Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the air filter of the Benelli TRK 502X, you will need to loosen the screws that secure the fairings located on the front sides of the vehicle, near the tank: once these panels are removed, you can proceed by loosening the screws that secure the tank and disconnecting the underlying pipes and connectors. In this way, you will have access to the air filter box, which can be opened by unscrewing the screws that secure the cover: at this point, you will need to remove the old filter so that the new one can be inserted.

Posted on 21 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the muffler of the Benelli TRK 502X?
How do you replace the muffler of the Benelli TRK 502X?
Trk 502 In order to replace the exhaust pipe of the Benelli TRK 502X, you need to loosen the screws that fix the exhaust terminal to its housing: this can be…
How do you replace the exhaust of the Benelli TRK 502X?
How do you replace the exhaust of the Benelli TRK 502X?
Trk 502 In order to replace the exhaust of the Benelli TRK 502X, you need to loosen the screws that fix the exhaust terminal to its housing, located on the r…
How do you replace the muffler of the Benelli TRK 502X?
How do you replace the muffler of the Benelli TRK 502X?
Trk 502 The exhaust installed on the Benelli TRK 502X can be replaced by loosening the screws that secure the component to its housing, which is located on t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos