Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on a Benelli BN 125, loosen the screws that secure the exhaust tip to its housing: this is located near the rear wheel, on the right side of the bike. Once the mounting screws are loosened, proceed to widen the clamp connecting the exhaust to the collector: at this point, you can remove the old one and insert the new one. After installation, check that everything functions correctly and that all components are securely fastened.

Posted on 31 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Bn 125 Before you can start, sit on the seat of your Benelli BN 125. First, lift the side stand. Next, insert and turn the key in the ignition switch to act…
Bn 125 Today, you will learn how to replace the front headlamp bulb on the Benelli BN 125 in simple and quick steps. Start by removing the front headlamp; t…
Bn 125 In this brief and simple guide, you will find instructions to remove and replace the throttle cable on the Benelli BN 125 motorcycle by following the…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos