Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat and Replace the Battery on a Yamaha YZF R3

Model: Yamaha Yzf R3
Part: Checks and maintenance

Video tutorial

Today, let's go through the instructions needed to remove the passenger seat and replace the battery on a Yamaha YZF R3 motorcycle. First, place the bike on its stand and start by removing the passenger seat by inserting the key into the lock located on the left side; then remove the rider's seat to access the battery compartment, as shown in the video.

At this point, disconnect both battery terminals (positive and negative), remove the old battery, and replace it with the new one; finally, refit the new battery and reassemble the seats!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of a Yamaha YZF R3
How to Remove the Rear Wheel of a Yamaha YZF R3
Yzf R3 In this video tutorial, you will learn how to remove and replace the rear wheel or tyre of the Yamaha YZF R3. First, place your bike on a stand and l…
How to Replace the Rear Brake Pads on Yamaha YZF R3
How to Replace the Rear Brake Pads on Yamaha YZF R3
Yzf R3 In this guide, you will learn how to remove and replace the rear brake pads on a Yamaha YZF R3 motorcycle in simple steps. First, unscrew the fixing …
How to replace the front brake pads on a Yamaha YZF-R3?
How to replace the front brake pads on a Yamaha YZF-R3?
Yzf R3 To replace the front brake pads on the Yamaha YZF-R3, you need to loosen the bolts that secure the brake caliper to its mounting: this is located at …

How to Replace the Fuel Filter on a Triumph Scrambler?

In this tutorial, you will see how to replace the fuel filter on a Triumph Scrambler, a very simple and quick operation to be performed approximately every 24 months. To do this, you will first need to remove the fuel tank, which is also a straightforward task. Start by placing the tank upside down, preferably on a soft cloth, then unscrew the 12 fixing bolts of the aluminium plate using an 8mm socket wrench. Next, extract the entire pump assembly, disconnect the filter hoses, and securely attach them to the replacement. Finally, reinsert the pump into the tank along with a new gasket and reassemble everything.

Watch the video!


by ScegliAuto

More videos