Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil and oil filter of a BMW R1200GS?

Model: Bmw R1200 GS
Part: Engine oil

Video tutorial

To change the motor oil and oil filter of a BMW R1200GS, start by lifting the motorcycle and placing it on a central stand or a stable surface. Remove the oil filler cap to allow for better drainage.

Place a tray under the engine and unscrew the oil drain plug with a wrench, allowing the used oil to completely drain out. Next, unscrew the oil filter with a specific tool, also removing the worn gasket. Replace the filter with a new one, making sure the gasket is properly positioned.

Before reinstalling the drain plug, check the gasket and apply some new oil. Finally, fill the engine with the oil recommended by the manufacturer and reattach the filler cap and drain plug. Check the oil level and start the engine to check for any leaks.


Posted on 24 December 2024 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a BMW R1200GS?
How to Change the Engine Oil of a BMW R1200GS?
R1200 GS To change the engine oil of a BMW R1200GS, start by lifting the bike with a centre stand or a stable platform to ensure adequate access to the engine…
How to Change the Engine Oil on a BMW R1200GS?
How to Change the Engine Oil on a BMW R1200GS?
R1200 GS In this tutorial, you will see how to change the engine oil on a BMW R1200 GS. This operation is extremely simple and quick. First, ensure that the e…
How to replace the engine oil in the BMW R1200GS?
How to replace the engine oil in the BMW R1200GS?
R1200 GS In this tutorial we can see how to replace the engine oil in the BMW R1200 GS, an extremely simple and quick operation. First of all, make sure that …

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos