Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a BMW R1200GS?

Model: Bmw R1200 GS
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil on a BMW R1200 GS. This operation is extremely simple and quick. First, ensure that the engine is sufficiently cool, then remove the lower protective cover and position a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using a 10mm hex key, and allow all the oil in the system to drain out. At this point, unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to change the motor oil and oil filter of a BMW R1200GS?
How to change the motor oil and oil filter of a BMW R1200GS?
R1200 GS To change the motor oil and oil filter of a BMW R1200GS, start by lifting the motorcycle and placing it on a central stand or a stable surface. Remov…
How to Change the Engine Oil in the BMW R1200GS?
How to Change the Engine Oil in the BMW R1200GS?
R1200 GS In this tutorial, you will see how to change the engine oil in the BMW R1200 GS, a very simple and quick operation. First, ensure that the engine is …
Removing the Front and Rear Wheel of a BMW R1200GS
Removing the Front and Rear Wheel of a BMW R1200GS
R1200 GS Here are step-by-step instructions on how to remove and replace the front and rear wheel of the BMW R1200GS motorcycle. First, place the bike on a st…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos