Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 GS
Part: Wheel

Below we will see step by step instructions on how to disassemble and replace the front and rear wheel of the BMW R1200GS motorcycle. First, we put the motorcycle on the stand and start unscrewing the fastening screws of the front brake calipers, removing them from the disc; then we unscrew the central pin of the wheel, using a socket wrench with extension, as shown in the video. Now we proceed to disassemble the rear wheel, applying almost the same procedure followed for the disassembly of the front wheel; if necessary, we replace the tires and reassemble everything!

Posted on 9 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front wheel of the BMW R 1200 GS
How to disassemble the front wheel of the BMW R 1200 GS
R1200 GS In this guide, we will see the steps that will allow us to disassemble and remove the front wheel of the BMW R1200 GS motorcycle. First of all, we pu…
How to disassemble the front headlight of a BMW R1200gs?
How to disassemble the front headlight of a BMW R1200gs?
R1200 GS Good morning, to disassemble the front headlight of our BMW R1200GS, we start by making sure the motorcycle is on a stable surface and the engine is …
How to change the motor oil and oil filter of a BMW R1200GS?
How to change the motor oil and oil filter of a BMW R1200GS?
R1200 GS To change the motor oil and oil filter of a BMW R1200GS, start by lifting the motorcycle and placing it on a central stand or a stable surface. Remov…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos