Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 GS
Part: Battery

Good morning, to disassemble the front headlight of our BMW R1200GS, we start by making sure the motorcycle is on a stable surface and the engine is turned off. We find the fixing bolts around the perimeter of the front headlight. We use the correct key to remove these bolts, making sure to keep them in a safe place to avoid losing them. Once the bolts are removed, we can carefully pull the front headlight from its housing. Be careful not to force it too much, it may be necessary to slightly rotate the headlight to fully unlock it. Once removed, we can disconnect the corresponding connector, and we will have finished the disassembly.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front and rear wheel of the BMW R1200GS.
Disassembly of the front and rear wheel of the BMW R1200GS.
R1200 GS Below we will see step by step instructions on how to disassemble and replace the front and rear wheel of the BMW R1200GS motorcycle. First, we put t…
How to replace the front headlight bulbs in the BMW R1200GS?
How to replace the front headlight bulbs in the BMW R1200GS?
R1200 GS In this tutorial we can see how to replace the headlight bulbs in the BMW R1200 GS, an extremely simple and quick operation. First of all, make sure …
How to change the motor oil and oil filter of a BMW R1200GS?
How to change the motor oil and oil filter of a BMW R1200GS?
R1200 GS To change the motor oil and oil filter of a BMW R1200GS, start by lifting the motorcycle and placing it on a central stand or a stable surface. Remov…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos