Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in the BMW R1200GS?

Model: Bmw R1200 GS
Part: Headlight bulb

Video tutorial

In this tutorial we can see how to replace the headlight bulbs in the BMW R1200 GS, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate in complete safety, then locate the circular cap placed on the back of the headlight in question and remove it. Subsequently disconnect the power connector, release the metal clip and remove the old bulb from the housing.

At this point, all that remains is to insert the replacement bulb, being careful not to touch it directly with bare hands, and reassemble everything.


Posted on 10 October 2025 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of a BMW R1200GS?
How to Remove the Front Headlight of a BMW R1200GS?
R1200 GS To remove the front headlight of your BMW R1200GS, ensure the motorcycle is on a stable surface and the engine is off. Locate the fastening bolts aro…
Removing the Front and Rear Wheel of a BMW R1200GS
Removing the Front and Rear Wheel of a BMW R1200GS
R1200 GS Here are step-by-step instructions on how to remove and replace the front and rear wheel of the BMW R1200GS motorcycle. First, place the bike on a st…
How to change the motor oil and oil filter of a BMW R1200GS?
How to change the motor oil and oil filter of a BMW R1200GS?
R1200 GS To change the motor oil and oil filter of a BMW R1200GS, start by lifting the motorcycle and placing it on a central stand or a stable surface. Remov…

How to change the engine oil in the Aprilia Tuono V4?

In this tutorial, you will learn how to change the engine oil in the Aprilia Tuono V4, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket spanner. Allow all the oil in the system to drain out, then unscrew the old filter and tighten both the new filter and the drain plug. At this point, simply pour the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos