Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 GS
Part: Wheel

In this guide, we will see the steps that will allow us to disassemble and remove the front wheel of the BMW R1200 GS motorcycle. First of all, we put the motorcycle on the center stand and lift the front wheel using the appropriate stand; we then unscrew the front wheel axle, using a socket wrench with extension, as shown in the video. At this point, we disconnect the brake calipers from the discs and then remove the wheel, replacing the tire if necessary; finally, we reassemble the front wheel and insert the axle to secure it properly!

Posted on 20 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the BMW R 1200 GS?
How do you replace the exhaust pipe of the BMW R 1200 GS?
R1200 GS To replace the exhaust of the BMW R 1200 GS, you need to loosen the screws that hold it to its housing: this will be located next to the rear wheel o…
How do you replace the front brake pads of the BMW R 1200 GS?
How do you replace the front brake pads of the BMW R 1200 GS?
R1200 GS It will be possible to replace the front brake pads of the BMW R1200 GS by loosening the screws that secure the caliper to its disc: then you will ne…
How to Replace the Air Filter on a 2017 R 1200 GS
How to Replace the Air Filter on a 2017 R 1200 GS
R1200 GS Today, you will learn how to independently replace the air filter on a 2017 R 1200 GS motorcycle. To carry out the air filter replacement, you need t…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos