Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 GS
Part:

Today's main instructions will show us how to disassemble and replace the alternator belt of the BMW R1200 GS motorcycle. First, we put the motorcycle on the center stand and start by removing the cover found on the front part of the engine block; on the back part, we find the V-belt, where we will use a socket wrench with an extension to loosen the tensioner, as shown in the video. At this point, we remove and replace the alternator belt, installing the original one, following the video tutorial until the end for reassembly!

Posted on 30 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Alternator Belt on a BMW R1200 GS
Replacing the Alternator Belt on a BMW R1200 GS
R1200 GS To change the alternator belt on a BMW R1200 GS, place the bike on its centre stand, if available, and remove the crash bar in front of the black pla…
How do you replace the exhaust pipe of the BMW R 1200 GS?
How do you replace the exhaust pipe of the BMW R 1200 GS?
R1200 GS To replace the exhaust of the BMW R 1200 GS, you need to loosen the screws that hold it to its housing: this will be located next to the rear wheel o…
How do you replace the front brake pads of the BMW R 1200 GS?
How do you replace the front brake pads of the BMW R 1200 GS?
R1200 GS It will be possible to replace the front brake pads of the BMW R1200 GS by loosening the screws that secure the caliper to its disc: then you will ne…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos