Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the BMW R 1200 GS?

Model: Bmw R1200 GS
Part: Brake pads

Video tutorial

It will be possible to replace the front brake pads of the BMW R1200 GS by loosening the screws that secure the caliper to its disc: then you will need to detach the caliper from the disc and remove the pin that locks the pads inside the corresponding housing.

Once the old pads have been removed, it will be possible to place the new ones inside the caliper: you will need to secure the caliper to the disc with the appropriate screws and you will be able to verify that the brake works correctly even after the replacement.


Posted on 25 July 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads of the BMW R 1200 GS
How to Replace the Rear Brake Pads of the BMW R 1200 GS
R1200 GS The following steps will illustrate the procedure for removing and replacing the rear brake pads of the BMW R1200 GS motorcycle. First, place the mot…
How do you replace the exhaust pipe of the BMW R 1200 GS?
How do you replace the exhaust pipe of the BMW R 1200 GS?
R1200 GS To replace the exhaust of the BMW R 1200 GS, you need to loosen the screws that hold it to its housing: this will be located next to the rear wheel o…
How to Replace the Left Handgrip Buttons on the BMW R 1200 GS?
How to Replace the Left Handgrip Buttons on the BMW R 1200 GS?
R1200 GS To replace the buttons located at the base of the left handgrip on the BMW R1200 GS, use a tool to pry them away from their housing: you will be able…

How to replace the transmission oil seal on the KTM XC 250

This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250. First, place your bike on a stand and begin by removing the gear lever by unscrewing its bolt; then remove the transmission cover and use something thin and pointed to extract the oil seal, as shown in the video. At this point, correctly install the new oil seal, pressing it in until it is flush, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos