Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 GS
Part: Battery

In this tutorial we can see how to replace the battery in the BMW R1200 GS Adventure, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then remove the plastic panel located on the right side of the motorcycle, below the tank. Then unhook both the rubber strap and the plastic bracket, disconnect the negative terminal and remove the old battery from the housing. At this point, all that remains is to disconnect the positive terminal, connect the replacement and mount it simply by following the reverse procedure.

Posted on 9 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the BMW R 1200 GS?
How do you replace the exhaust pipe of the BMW R 1200 GS?
R1200 GS To replace the exhaust of the BMW R 1200 GS, you need to loosen the screws that hold it to its housing: this will be located next to the rear wheel o…
How to replace the starter motor of the BMW R 1200 GS
How to replace the starter motor of the BMW R 1200 GS
R1200 GS Today's step-by-step instructions will show us how to disassemble and replace the starter motor of the BMW R1200 GS motorcycle. First, we put the mot…
How to replace the rearview mirrors on the BMW R 1200 GS?
How to replace the rearview mirrors on the BMW R 1200 GS?
R1200 GS In this tutorial we can see how to replace the rearview mirrors on the BMW R1200 GS, an extremely simple and quick operation. First of all, position …

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos