Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's step-by-step instructions will show us how to disassemble and replace the starter motor of the BMW R1200 GS motorcycle. First, we put the motorcycle on the center stand and start by disconnecting the battery as a precaution; then we unscrew the fixing screws of the starter motor, disconnecting the electrical wiring to remove it, as shown in the video. At this point, we carry out the repair or replacement of the starter motor with the new one, fixing it properly and connecting the wiring, finally verifying the correct ignition of the engine!

Posted on 26 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the BMW R 1200 GS?
How do you replace the exhaust pipe of the BMW R 1200 GS?
R1200 GS To replace the exhaust of the BMW R 1200 GS, you need to loosen the screws that hold it to its housing: this will be located next to the rear wheel o…
Disassembly and replacement of the alternator belt of the BMW R 1200 GS.
Disassembly and replacement of the alternator belt of the BMW R 1200 GS.
R1200 GS Today's main instructions will show us how to disassemble and replace the alternator belt of the BMW R1200 GS motorcycle. First, we put the motorcycl…
How to Change the Engine Oil in a BMW R 1200 GS?
How to Change the Engine Oil in a BMW R 1200 GS?
R1200 GS In this tutorial, you will learn how to change the engine oil in a BMW R1200 GS, a very simple and quick operation. First, ensure the engine is cool …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos