Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Yamaha YZF R3?

Model: Yamaha Yzf R3
Part: Engine oil

Video tutorial

To change the oil of the Yamaha YZF R3, start by lifting the bike with a center stand or a stable surface. First of all, remove the oil filler cap located on the top of the engine to allow for better drainage.

Place a tray under the engine and unscrew the oil drain plug with a wrench to drain the used oil. After completely draining the oil, remove the oil filter using a special filter tool, being careful to remove the worn gasket. Replace the filter with a new one, lightly lubricating the gasket with some new oil. Reassemble the drain plug and screw on the new filter.

At this point, fill the engine with the oil recommended by the manufacturer and screw on the filler cap. Start the engine for a few seconds, then check the oil level and make sure there are no leaks.


Posted on 24 December 2024 by ScegliAuto


Related tutorials

How to Replace the Engine Oil of the Yamaha YZF-R3?
How to Replace the Engine Oil of the Yamaha YZF-R3?
Yzf R3 To replace the engine oil of the Yamaha YZF-R3, loosen the drain plug of the oil sump, located at the lower central area of the bike: once this plug …
How to replace the engine oil in the Yamaha YZF-R3?
How to replace the engine oil in the Yamaha YZF-R3?
Yzf R3 In this tutorial we can see how to replace the engine oil in the Yamaha YZF-R3, an extremely simple and quick operation. First of all, make sure that…
How to replace the engine oil in the Yamaha YZF R3?
How to replace the engine oil in the Yamaha YZF R3?
Yzf R3 In this tutorial we can see how to replace the engine oil in the Yamaha YZF R3, an extremely simple and fast operation. First of all, make sure that …

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos