Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Yamaha YZF R3?

Model: Yamaha Yzf R3
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Yamaha YZF R3, an extremely simple and fast operation. First of all, make sure that the engine is sufficiently cold, then position a container under the motorcycle, locate the drain hole bolt and unscrew it using a 17mm socket wrench.

Let all the oil in the system drain out, unscrew the old filter and tighten both the replacement and the bolt. At this point, all that's left to do is to pour the required amount of oil through the appropriate upper hole.


Posted on 27 December 2024 by ScegliAuto


Related tutorials

How to Replace the Engine Oil of the Yamaha YZF-R3?
How to Replace the Engine Oil of the Yamaha YZF-R3?
Yzf R3 To replace the engine oil of the Yamaha YZF-R3, loosen the drain plug of the oil sump, located at the lower central area of the bike: once this plug …
How to replace the engine oil in the Yamaha YZF-R3?
How to replace the engine oil in the Yamaha YZF-R3?
Yzf R3 In this tutorial we can see how to replace the engine oil in the Yamaha YZF-R3, an extremely simple and quick operation. First of all, make sure that…
How to replace the front brake pads on a Yamaha YZF-R3?
How to replace the front brake pads on a Yamaha YZF-R3?
Yzf R3 To replace the front brake pads on the Yamaha YZF-R3, you need to loosen the bolts that secure the brake caliper to its mounting: this is located at …

How to Replace the Fuel Filter on a Triumph Scrambler?

In this tutorial, you will see how to replace the fuel filter on a Triumph Scrambler, a very simple and quick operation to be performed approximately every 24 months. To do this, you will first need to remove the fuel tank, which is also a straightforward task. Start by placing the tank upside down, preferably on a soft cloth, then unscrew the 12 fixing bolts of the aluminium plate using an 8mm socket wrench. Next, extract the entire pump assembly, disconnect the filter hoses, and securely attach them to the replacement. Finally, reinsert the pump into the tank along with a new gasket and reassemble everything.

Watch the video!


by ScegliAuto

More videos