Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the fuel filter on a Triumph Scrambler, a very simple and quick operation to be performed approximately every 24 months. To do this, you will first need to remove the fuel tank, which is also a straightforward task. Start by placing the tank upside down, preferably on a soft cloth, then unscrew the 12 fixing bolts of the aluminium plate using an 8mm socket wrench. Next, extract the entire pump assembly, disconnect the filter hoses, and securely attach them to the replacement. Finally, reinsert the pump into the tank along with a new gasket and reassemble everything.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on the Triumph Scrambler
How to Replace the Fuel Filter on the Triumph Scrambler
Scrambler To replace the fuel filter on the Triumph Scrambler, you need to completely remove the fuel tank located at the front of the bike. This tank can be r…
How to Replace the Air Filter on a Triumph Scrambler
How to Replace the Air Filter on a Triumph Scrambler
Scrambler To replace the air filter on the Triumph Scrambler, loosen the screws securing the protective cover located on the left side of the bike. Once these …
How do you replace the air filter of the Triumph Scrambler?
How do you replace the air filter of the Triumph Scrambler?
Scrambler The procedure for replacing the air filter of the Triumph Scrambler involves removing the triangular panel located on the left side of the bike, just…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos