Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Symphony St 200i
Part:

Here are the step-by-step instructions for disassembling and replacing the variator and belt on the Sym Symphony ST scooter, following these simple steps. First, place your scooter on the centre stand and start unscrewing the fixing screws of the transmission cover; then unscrew the nut of the fan and that of the clutch bell, subsequently removing the transmission belt, as shown in the video. At this point, also remove the variator, replacing the rollers if necessary; then reassemble everything, applying the reverse procedure!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Oil Check light on the Sym Symphony ST 200i?
How to reset the Oil Check light on the Sym Symphony ST 200i?
Symphony St 200i To reset the Oil Check light on the Sym Symphony ST 200i, press the M button located below the display of the instrument panel, next to the button wi…
How to Replace the Gear Oil on a Sym Symphony ST 200i
How to Replace the Gear Oil on a Sym Symphony ST 200i
Symphony St 200i Watch this video to learn how to replace the gear oil or transmission oil on a Sym Symphony ST 200i scooter, following the instructions below. First,…
Engine Oil Change for Sym Symphony ST 200i
Engine Oil Change for Sym Symphony ST 200i
Symphony St 200i In this video tutorial, you will see instructions on how to change the engine oil of a Sym Symphony ST 200i. First, position your scooter on its cent…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos