Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Wheel of a Yamaha YZF R3

Model: Yamaha Yzf R3
Part: Wheel

Video tutorial

In this video tutorial, you will learn how to remove and replace the rear wheel or tyre of the Yamaha YZF R3. First, place your bike on a stand and lift the rear wheel off the ground; then, unscrew the central axle of the wheel using a socket and a long extension, as shown in the video.

At this point, remove the wheel by disconnecting the drive chain; replace the rear tyre or brake disc if necessary (along with the brake pads), applying the reverse procedure for reassembly!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Yzf R3 To replace the exhaust on the Yamaha YZF-R3, loosen all the screws that secure it to its housing: these screws are located at the top of the exhaust,…
Yzf R3 To replace the engine oil of the Yamaha YZF-R3, loosen the drain plug of the oil sump, located at the lower central area of the bike: once this plug …
Yzf R3 Here are step-by-step instructions to remove and replace the fuel tank cap on the Yamaha YZF R3. First, place the motorcycle on its stand and begin t…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos