How to Replace the Fuel Cap on the Yamaha YZF R3

Model: Yamaha Yzf R3
Part: Fuel cap

This video is currently unavailable

Here are step-by-step instructions to remove and replace the fuel tank cap on the Yamaha YZF R3. First, place the motorcycle on its stand and begin to open the tank cap. Then, use an Allen key to unscrew the fixing screws located on the sides of the cap, as shown in the video.

At this point, remove and replace the tank cap with a new one of the correct type; then secure it properly with its screws, ensuring the gasket is installed correctly by following the reverse procedure!

Updated on 28 September 2026 by ScegliAuto

Related tutorials

How to Replace the Front Headlight Bulbs on Yamaha YZF-R3?

Yzf R3 In this tutorial, we will see how to replace the front headlight bulbs on the Yamaha YZF-R3, a very simple and quick operation. First, ensure that th…

How to Replace the Engine Oil of the Yamaha YZF-R3?

Yzf R3 To replace the engine oil of the Yamaha YZF-R3, loosen the drain plug of the oil sump, located at the lower central area of the bike: once this plug …

How to replace the engine oil in the Yamaha YZF-R3?

Yzf R3 In this tutorial we can see how to replace the engine oil in the Yamaha YZF-R3, an extremely simple and quick operation. First of all, make sure that…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!

by ScegliAuto

How to Replace the Fuel Cap on the Yamaha YZF R3

Related tutorials

How to Clean the Throttle Body on a Piaggio Beverly

More videos