Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Yamaha YZF-R3?

Model: Yamaha Yzf R3
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Yamaha YZF-R3, loosen all the screws that secure it to its housing: these screws are located at the top of the exhaust, on the right side of the bike near the rear wheel. Once this screw is loosened, proceed to loosen the screws that connect the exhaust to the remaining part of the exhaust system; this will allow you to completely remove the old exhaust from its position.

The new one can then be inserted, securing it to the relevant supports and the exhaust system.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil of the Yamaha YZF-R3?
How to Replace the Engine Oil of the Yamaha YZF-R3?
Yzf R3 To replace the engine oil of the Yamaha YZF-R3, loosen the drain plug of the oil sump, located at the lower central area of the bike: once this plug …
How to Replace the Rear Brake Pads on Yamaha YZF R3
How to Replace the Rear Brake Pads on Yamaha YZF R3
Yzf R3 In this guide, you will learn how to remove and replace the rear brake pads on a Yamaha YZF R3 motorcycle in simple steps. First, unscrew the fixing …
How to replace the engine oil in the Yamaha YZF-R3?
How to replace the engine oil in the Yamaha YZF-R3?
Yzf R3 In this tutorial we can see how to replace the engine oil in the Yamaha YZF-R3, an extremely simple and quick operation. First of all, make sure that…

How to Replace the Fuel Filter on a Triumph Scrambler?

In this tutorial, you will see how to replace the fuel filter on a Triumph Scrambler, a very simple and quick operation to be performed approximately every 24 months. To do this, you will first need to remove the fuel tank, which is also a straightforward task. Start by placing the tank upside down, preferably on a soft cloth, then unscrew the 12 fixing bolts of the aluminium plate using an 8mm socket wrench. Next, extract the entire pump assembly, disconnect the filter hoses, and securely attach them to the replacement. Finally, reinsert the pump into the tank along with a new gasket and reassemble everything.

Watch the video!


by ScegliAuto

More videos