|
Do it yourself
| |||
| ||||
|
Model: Benelli Panarea 125
You can replace the front brake pads on the Benelli Panarea 125 by loosening the screws that secure the brake caliper to the corresponding disc. Once the caliper is detached, you can remove the pin that holds the pads inside the caliper to take it out completely. At this point, you can insert the new pads into the caliper, secure the caliper onto the disc, and then fasten it with the screws. Finally, operate the brake to ensure everything functions correctly.
Posted on 24 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Panarea 125
These brief and simple steps will allow you to perform the routine maintenance service by changing the engine oil on the Benelli Panarea 125 scooter.…
Panarea 125
The air filter of the Benelli Panarea 125 can be replaced by loosening the screws that secure the protection panel of the filter box, located near th…
Panarea 125
The engine oil that will be present inside the Benelli Panarea 125 can be replaced by loosening the drain plug of the oil sump located in the central…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.106
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |