Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Headlamp Bulb on Benelli BN 302

Model: Benelli Bn 302
Part: Headlight bulb

Video tutorial

Today, remove the Torx screws located under the instrument panel to detach the headlamp. Next, unscrew the screws from the bulb cover to access the bulbs.

Disconnect the electrical connector of the bulb and release the metal clip holding it in place. Now, extract the bulb and replace it with a new one of the correct type (in this case, H7 fitting), then refit it by reversing the disassembly procedure!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Bn 302 Let's briefly discover how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Benelli BN 302. First, plac…
Bn 302 This guide explains how to carry out the routine maintenance oil change on the Benelli BN 302 motorcycle. First, place your motorcycle on a stand and…
Bn 302 To replace the brake pads on a Benelli BN 302, perform the same operation for both the front and rear pads. You will need to unscrew the bolts that s…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Chain and Sprocket on the Ducati Scrambler

Follow these main instructions to remove and replace the chain and sprocket on your Ducati Scrambler motorcycle. First, place your bike on the centre stand and begin loosening the drive chain by removing the lock; then unscrew the screws from the sprocket cover and remove the rear wheel if you also need to replace the rear sprocket, as shown in the video. At this point, remove the chain and sprocket, replacing them with new ones; ensure the chain is compatible with your drive system, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos