Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will learn how to change the engine oil and oil filter on a Benelli TNT 135 motorcycle by following these simple steps. First, warm up the engine for a few minutes; then unscrew the oil drain bolt located at the bottom using a socket spanner. At this point, let the oil drain into a container and, in the meantime, unscrew the screws of the oil filter cover to replace it with the new one. Finally, insert the new engine oil into the designated fill hole and fill it to the maximum level!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 135 To change the engine oil on a Benelli TnT 135, unscrew the plug located at the bottom of the casing on the right side of the bike, just below the cor…
Tnt 135 In this tutorial, you will see how to change the engine oil in a Benelli TNT 135, a very simple and quick operation. First, wait until the engine is …
Tnt 135 In this tutorial, you can see how to change the engine oil in the Benelli TNT 135, a very simple and quick operation. First, wait until the engine is…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos