Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in a Benelli TNT 135?

Model: Benelli Tnt 135
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Benelli TNT 135, a very simple and quick operation. First, wait until the engine is sufficiently cool, then position a container underneath it. Locate the drain hole bolt and loosen it using a socket spanner.

Next, remove the small filter, clean it of any residue, and allow the oil in the system to drain out. At this point, open the main filter housing, replace the filter, reassemble everything, and pour in the new oil through the designated hole.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Tnt 135 In this tutorial, we can see how to replace the motor oil in the Benelli TNT 135, a very simple and quick operation. First of all, make sure that the…
Tnt 135 In this tutorial, you can see how to change the engine oil in the Benelli TNT 135, a very simple and quick operation. First, wait until the engine is…
Tnt 135 In this tutorial, you will learn how to change the engine oil and oil filter on a Benelli TNT 135 motorcycle by following these simple steps. First, …

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos