Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the motor oil in the Benelli TNT 135, a very simple and quick operation. First of all, make sure that the engine is cool enough, then place a container under the bike, locate the drainage hole bolt and unscrew it using a socket wrench. Wait for all the oil to drain out, open the filter cap by unscrewing the bolts and insert the replacement. At this point, all that's left is to reassemble everything and pour the necessary amount of oil through the designated hole.

Posted on 18 October 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Engine Oil on a Benelli TnT 135
How to Change the Engine Oil on a Benelli TnT 135
Tnt 135 To change the engine oil on a Benelli TnT 135, unscrew the plug located at the bottom of the casing on the right side of the bike, just below the cor…
Changing Engine Oil and Oil Filter on a Benelli TNT 135
Changing Engine Oil and Oil Filter on a Benelli TNT 135
Tnt 135 In this tutorial, you will learn how to change the engine oil and oil filter on a Benelli TNT 135 motorcycle by following these simple steps. First, …
How to Change the Engine Oil in the Benelli TNT 135
How to Change the Engine Oil in the Benelli TNT 135
Tnt 135 In this tutorial, we will see how to change the engine oil in the Benelli TNT 135, a very simple and quick operation. First, ensure the engine is coo…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos