Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on a Benelli TnT 135, unscrew the plug located at the bottom of the casing on the right side of the bike, just below the corresponding footpeg. Once the cover is removed, collect the used oil in a suitably placed container. When the oil has completely drained, close the drain plug and add new oil through the designated cap at the top. After adding the oil, close the casing with its plug.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Benelli TNT 135?
How to Change the Engine Oil in a Benelli TNT 135?
Tnt 135 In this tutorial, you will see how to change the engine oil in a Benelli TNT 135, a very simple and quick operation. First, wait until the engine is …
Changing Engine Oil and Oil Filter on a Benelli TNT 135
Changing Engine Oil and Oil Filter on a Benelli TNT 135
Tnt 135 In this tutorial, you will learn how to change the engine oil and oil filter on a Benelli TNT 135 motorcycle by following these simple steps. First, …
How to change the engine oil in the Benelli TNT 135?
Tnt 135 In this tutorial, you can see how to change the engine oil in the Benelli TNT 135, a very simple and quick operation. First, wait until the engine is…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos