Do it yourself
Frequently asked questions about cars and motorcycles

Model: Benelli Tnt 250
Part: Battery

To replace the battery on the Benelli TNT 250, first remove the seat by unscrewing the relevant fixing screws. Once the seat is removed, you can also take off the side fairing that protects the battery compartment. This way, the old battery can be disconnected and removed from its housing. The new battery should be placed in its position and reconnected to the respective terminals. Once the battery has been correctly replaced, remount the side fairing and the seat.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 250 The procedure for changing the engine oil on a Benelli TnT 250 involves loosening the drain plug of the oil sump, located at the bottom of the vehicl…
Tnt 250 To replace the clutch on a Benelli TnT 250, loosen the fixing bolts of the cover located on the right side of the bike in the central position. Once …
Tnt 250 To replace the air filter on the Benelli TnT 250, loosen the screws securing the seat to its housing. Once the seat is free from the corresponding sc…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos