Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Benelli Tnt 250 - Video guides

Benelli Tnt 250
How to change the engine oil of a Benelli TNT 250?
To change the engine oil of a Benelli TNT 250, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the …Read all…
Posted on 2 October 2026 by ScegliAuto
Benelli Tnt 250
How to Change the Engine Oil on a Benelli TnT 250?
The procedure for changing the engine oil on a Benelli TnT 250 involves loosening the drain plug of the oil sump, located at the bottom of the vehicle: by …Read all…
Posted on 31 October 2026 by ScegliAuto
Benelli Tnt 250
How to Replace the Air Filter on the Benelli TnT 250
To replace the air filter on the Benelli TnT 250, loosen the screws securing the seat to its housing. Once the seat is free from the corresponding screws, …Read all…
Posted on 22 September 2026 by ScegliAuto
Benelli Tnt 250
How to Replace the Clutch on a Benelli TnT 250?
To replace the clutch on a Benelli TnT 250, loosen the fixing bolts of the cover located on the right side of the bike in the central position. Once these …Read all…
Posted on 21 August 2026 by ScegliAuto
Benelli Tnt 250
How to replace the engine air filter of the Benelli TNT 250
In this guide, we will see the instructions that will allow us to remove and replace the engine air filter of the Benelli TNT 250. First, place the stand on …Read all…
Posted on 20 July 2026 by ScegliAuto
Benelli Tnt 250
How to Replace the Battery on the Benelli TNT 250?
To replace the battery on the Benelli TNT 250, first remove the seat by unscrewing the relevant fixing screws. Once the seat is removed, you can also take off …Read all…
Posted on 3 July 2026 by ScegliAuto
Benelli Tnt 250
Change the Engine Oil and Oil Filter on a Benelli TNT 250
Let’s see how to perform routine maintenance by changing the engine oil and oil filter on a Benelli TNT 250 motorcycle. First, remove the lower side fairings …Read all…
Posted on 25 May 2026 by ScegliAuto

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos