|
Do it yourself
| |||
| ||||
Model: Benelli Bn 125
In this video tutorial, you will learn how to remove and replace the brake and clutch levers on a Benelli Bn 125, following the instructions below. First, place the central stand on your bike; then unscrew the fixing screw of the clutch lever, disconnecting the cable to remove it, as shown in the video. At this point, install the new lever, securing it properly; perform the same operation for the replacement of the front brake lever, and finally adjust the travel, following the video until the end!
Updated on 16 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Bn 125
Before you can start, sit on the seat of your Benelli BN 125. First, lift the side stand. Next, insert and turn the key in the ignition switch to act…
Bn 125
In this video tutorial, you will learn how to change the engine oil of a Benelli BN 125, performing the regular maintenance interval. First, unscrew …
Bn 125
In today's video, you will see the procedure necessary to replace the engine oil and oil filter of the Benelli BN 125 motorcycle. First, place the mo…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
