Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to change the engine oil in a Benelli TNT 125, a simple task to perform approximately every 12 months. First, ensure the engine is completely cold, then position a container underneath and remove the cap from the upper fill hole. Next, use a 13 mm socket to loosen the drain bolt, allowing all the oil in the system to drain out, and proceed with replacing the filter. Once this is done, tighten all bolts and add the required amount of oil through the upper hole.

Updated on 1 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Engine Light on a Benelli TNT 125
How to Reset the Engine Light on a Benelli TNT 125
Tnt 125 Before you can begin, sit on the seat of your Benelli TNT 125. Start by activating the instrument panel by turning the key in the ignition switch, th…
Replace Engine Oil and Oil Filter on Benelli TNT 125
Replace Engine Oil and Oil Filter on Benelli TNT 125
Tnt 125 In this video, learn how to replace the engine oil and oil filter on a Benelli TNT 125, performing the regular maintenance service. First, warm up th…
How to Change the Engine Oil on the Benelli TNT 125
How to Change the Engine Oil on the Benelli TNT 125
Tnt 125 This guide will show you the procedure necessary for changing the engine oil during the regular maintenance service of the Benelli TNT 125. First, pl…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos