|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 135
To replace the clutch on a Benelli TnT 135, loosen the screws that secure the specific cover located on the right side of the bike, near the gear lever. Once all the fixing screws of the cover have been removed, you can detach the cover itself to access the clutch discs underneath: these can be removed from their housing by loosening the fixing screws. This will allow you to insert the new discs that make up the clutch, securing everything with the screws removed earlier.
Updated on 9 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Tnt 135
In order to replace the clutch of the Benelli TnT 135, you need to loosen the screws that fix the casing located on the right side of the vehicle: on…
Tnt 135
To change the engine oil on a Benelli TnT 135, unscrew the plug located at the bottom of the casing on the right side of the bike, just below the cor…
Tnt 135
To replace the battery on the Benelli TNT 135, insert the key into the designated side lock of the bike, near the seat. Remove the seat to access the…
|
How to Replace the Headlight Bulbs on the KTM RC 200?
As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
