|
Do it yourself
| |||
| ||||
|
Model: Benelli Trk 502
To replace the spark plugs on a Benelli TRK 502, loosen the screws securing the fuel tank to its housing: these screws are located on the sides of the tank and at the rear, accessible after removing the seat. Once the tank is completely removed, you can disconnect the underlying ignition coils to access the spark plugs. These can be extracted using a socket wrench and replaced with new replacement parts, reassembling all the removed components.
Updated on 13 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Trk 502
To replace the clutch on the Benelli TRK 502, loosen the screws that secure the cover on the right side of the bike, near the kickstarter: once all t…
Trk 502
Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
Trk 502
The replacement of the exhaust pipe of the Benelli TRK 502 can be carried out by loosening the screws that fix the exhaust terminal to its housing: t…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |