Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta 300 Rr
Part: Starter motor

In order to replace the starter motor on the Beta 300 RR, you need to loosen the screws that secure the engine block inside its housing: in addition to loosening the support screws, you will also need to remove the screws that secure the exhaust pipes and those of the cooling liquid. In this way, the engine block can be lifted and the screws that secure the starter motor in its lower right part can be loosened; by removing the starter motor, it will then be possible to insert the new replacement piece, position it properly and proceed to mount all the other parts.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor on the Beta 300 RR
How to Replace the Starter Motor on the Beta 300 RR
300 Rr To replace the starter motor on the Beta 300 RR, loosen the bolts that secure the engine block within its housing: in addition to loosening the suppo…
How to replace the clutch on the Beta 300 RR
How to replace the clutch on the Beta 300 RR
300 Rr To replace the clutch on the Beta 300 RR, loosen the bolts securing the cover on the right side of the bike, near the kickstarter. Once the bolts are…
How to Replace the Cylinder on a Beta 300 RR?
How to Replace the Cylinder on a Beta 300 RR?
300 Rr To replace the cylinder on a Beta 300 RR, loosen the screws that secure it to the top of the engine block. Once these screws are loosened, you can co…

How to Change the Speedometer Unit of the Triumph Speed Triple

If you own a Triumph Speed Triple and want to switch from miles per hour (MPH) to kilometres per hour (Km/h) and vice versa, follow these instructions carefully. First, insert the key and turn on the ignition. Then, locate the three buttons at the bottom of the display and press them all simultaneously for a few seconds. Once the display starts flashing, release the buttons and press the "Ser" button multiple times until you see the number 1 for Km/h (or 3 for MPH). Press "Set" to finish.

Watch the video!


by ScegliAuto

More videos