Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The thermostat installed on the Beta 300 RR can be found in the area between the engine cylinder and the radiator: in order to extract the thermostat from its housing, it will be necessary to first loosen the bolts that secure the coolant pipes. Once these pipes have been loosened, it will be possible to proceed by unscrewing the screws that secure the thermostat to its supports, so that it can be removed and replaced with a new one: the latter can be fixed with the appropriate screws, then connecting all the components that were just removed.

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on the Beta 300 RR?
How to Replace the Thermostat on the Beta 300 RR?
300 Rr To replace the thermostat on the Beta 300 RR, locate it in the area between the engine cylinder and the radiator: first, loosen the bolts securing th…
How to Replace the Exhaust on the Beta 300 RR
How to Replace the Exhaust on the Beta 300 RR
300 Rr You can replace the exhaust on the Beta 300 RR by loosening the screws that secure the exhaust terminal to its housing: before doing this, you will n…
How do you disassemble the engine of the Beta 300 RR?
How do you disassemble the engine of the Beta 300 RR?
300 Rr The engine of the Beta 300 RR can be disassembled by loosening the bolts that fix the engine block inside its housing compartment: once the engine bl…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos