Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Beta 300 RR

Model: Beta 300 Rr
Part: Exhaust muffler

Video tutorial

You can replace the exhaust on the Beta 300 RR by loosening the screws that secure the exhaust terminal to its housing: before doing this, you will need to loosen the screws that secure the side cover panel of the mudguard. This will allow you to proceed by loosening the clamp located between the exhaust and the collector to remove the exhaust terminal.

At this point, you can position the new replacement part, ensuring it is secured to the supports and then connected to the collector.


Posted on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust of the Beta 300 RR?
How to Replace the Exhaust of the Beta 300 RR?
300 Rr To replace the exhaust of the Beta 300 RR, you need to unscrew the bolt that secures the clamp connecting the exhaust to the remaining part of the ex…
How to Replace the Brake Fluid on a Beta 300 RR?
How to Replace the Brake Fluid on a Beta 300 RR?
300 Rr To replace the brake fluid on a Beta 300 RR, open the bleed screw and insert a tube connected to a container to hold the fluid. Next, open the brake …
How to replace the clutch on the Beta 300 RR
How to replace the clutch on the Beta 300 RR
300 Rr To replace the clutch on the Beta 300 RR, loosen the bolts securing the cover on the right side of the bike, near the kickstarter. Once the bolts are…

How to Replace the Temperature Sensor on the Aprilia RS 125

Today, we will see, in this short and simple guide, the instructions on how to remove and replace the temperature sensor on the Aprilia RS 125 motorcycle. First, place your motorcycle on a stand and start by removing the radiator hose, loosening the metal clamp, and draining the fluid into a container for about ten minutes; then remove the fuel tank to access the engine head. At this point, disconnect the electrical connector of the temperature sensor and unscrew it with a spanner to remove and replace it with the new one!

Watch the video!


by ScegliAuto

More videos