Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the brake fluid on a Beta 300 RR, open the bleed screw and insert a tube connected to a container to hold the fluid. Next, open the brake fluid reservoir cap and start pumping the brake while keeping the bleed screw open with a spanner, allowing the fluid to drain slowly. It is important not to let the fluid level drop below the reservoir; once most of the fluid has exited the system, use a syringe to add new brake fluid into the reservoir.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Beta 300 RR
How to Replace the Exhaust on the Beta 300 RR
300 Rr You can replace the exhaust on the Beta 300 RR by loosening the screws that secure the exhaust terminal to its housing: before doing this, you will n…
How to Replace the Fork Oil on a Beta 300RR?
How to Replace the Fork Oil on a Beta 300RR?
300 Rr To replace the fork oil on a Beta 300RR, first remove the bolts securing it to the bike, located at the top and corresponding to the wheel. Once the …
How do you replace the starter motor of the Beta 300 RR?
How do you replace the starter motor of the Beta 300 RR?
300 Rr In order to replace the starter motor on the Beta 300 RR, you need to loosen the screws that secure the engine block inside its housing: in addition …

How to Replace the Front Brake Pads on a Yamaha MT-125

Follow these steps to remove and replace the front brake pads on the Yamaha MT-125. First, place the motorcycle on a stand and begin unscrewing the bolts securing the front brake caliper to remove it from the disc. Next, remove the brake pads inside by pressing the piston to retract it, as shown in the video. Clean the caliper of any residual dirt, then install the new high-quality pads; reassemble the braking system!

Watch the video!


by ScegliAuto

More videos