Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Derbi Fds

Model: Derbi Fds
Part: Engine oil

Video tutorial

Below are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on a Derbi Fds. First, place the motorcycle on its stand and begin draining the engine oil by unscrewing the drain bolt located under the engine.

Allow the old oil to drain into a container for about ten minutes.

At this point, unscrew the filler cap and perform the refill; use oil with the correct specifications, and finally check the oil level using the dipstick!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank on Derbi FDS
How to Remove the Fuel Tank on Derbi FDS
Fds In today's tutorial, learn how to remove the fuel tank from a Derbi FDS enduro bike by following the instructions below. First, remove the seat by un…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos