Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing.

Posted on 18 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Husqvarna 701?
How to Replace the Front Headlight on a Husqvarna 701?
701 Sm To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you…
How to Remove the Front Headlight of a Husqvarna 701
How to Remove the Front Headlight of a Husqvarna 701
701 Sm To remove the front headlight of a Husqvarna 701, loosen the four Torx screws (T30) located on either side of the headlight, between the front fork a…
How to Replace the Front Headlight on the Husqvarna 701?
How to Replace the Front Headlight on the Husqvarna 701?
701 Sm In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos