Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of a Husqvarna 701
How to Remove the Front Headlight of a Husqvarna 701
701 Sm To remove the front headlight of a Husqvarna 701, loosen the four Torx screws (T30) located on either side of the headlight, between the front fork a…
How do you replace the front headlight of the Husqvarna 701?
How do you replace the front headlight of the Husqvarna 701?
701 Sm The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight…
How to Replace the Front Headlight on a Husqvarna 701?
How to Replace the Front Headlight on a Husqvarna 701?
701 Sm To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos